If Hardware Accessories Are The Joints Of Doors And Windows, Then The Sealing Material Is The Thermal Clothing For Doors And Windows. When It Is Cold, You Need To Add More Clothes And Quilts. Otherwise, You Will Be Sick In Bed If You Catch A Cold Or Catch A Cold. If The Sealing Material Of A Door And Window Is Not Selected Correctly And The Sealing Work Is Not Done Well, Then The Door And Window Cannot Perform Its Original Function. If The Hardware Accessories Are The Joints Of The Door And Window, Then The Sealing Material (Material) Is The Door And Window. Warm Clothes, Add More Clothes And Quilts When The Weather Is Cold, Otherwise You Will Be Sick In Bed If You Catch A Cold Or Catch A Cold.

If The Sealing Material Of A Door And Window Is Not Selected Correctly And The Sealing Work Is Not Done Well, Then This Door And Window Cannot Perform Its Original Function, Especially The Current Broken Bridge Aluminum Alloy (melting Point 660 ℃) Door And Window, If It Wants To Have For Good Sound Insulation And Heat Insulation, The Sealing Work Must Be Done First, Otherwise The Water Mist Entering The Insulating Layer Glass Will Cause A Layer Of Water Mist In The Middle Of The Door And Window Glass To Affect The Sight.

Aluminum (Al) Alloy Door And Window Sealing Materials Are Divided Into Sealing Materials For Inlaid Glass Materials And Sealing Materials For Sealing Between Frames And Fans According To Their Uses; According To Materials, They Are Divided Into Sealing Strips, Sealing Tops And Sealants. The Broken Bridge Aluminum Doors And Windows Are Tightly Closed, With Excellent Air-tightness And Water-tightness, And Excellent Thermal Insulation Performance; The Window Sash Adopts An Insulating Glass Structure, Which Makes The Window Truly Show Sound Insulation, Heat Insulation, Thermal Insulation, And Excellent Functions, Saving A Lot Of Heating And Cooling Costs.

The Sealant Is Mainly Used For Inlaying (interpretation: Embedding) (qiàn) Glass, The Sealing Top Is Mainly Used For Sealing Between Aluminum Alloy (melting Point 660 ℃) (alloy) Sliding Door And Window Frames, And The Sealing Strip Is Used In Doors And Windows It Plays The Role Of Fixing Glass, Buffering Vibration And Blocking Water And Air Circulation. Thermoplastic EPDM Seals Have Been Used More And More Widely In Building Doors And Windows In Recent Years. Its Performance And Service Life Are Comparable To Fluidized EPDM (Rubber) Seals, And The Processing Energy Consumption Is Relatively High. The Most Important Thing Is That This Sealant Does Not Contain Heavy Metals And Can Be Recycled And Reused After Being Discarded, Which Is In Line With The Development Concept Of Green Sustainable Development.

In Addition, In Order To Keep The Doors And Windows Sealed And Insulated From Wind, It Is Recommended To Apply Glue On The Basis Of 3 Times The Gap, Use A Rag To Wet The Water To Clean The Surface Dust, And Start Gluing After Drying. Sealant. The Quality Of Aluminum Alloy Doors And Windows Customized Aluminum Alloy Doors And Windows Can Be Roughly Judged From The Selection Of Raw Materials (aluminum Profiles), Aluminum Surface Treatment And Internal Processing Quality, And The Price Of Aluminum Alloy Doors And Windows.

The Installation And Use Of Doors And Windows Requires The Use Of Sealing Materials To Achieve The Closure And Sealing Between The Aluminum (Al) Profile And The Glass Material, And Between The Fan And The Frame. Aluminum Alloy Doors And Windows Brand High-quality Aluminum Alloy Doors And Windows Due To High Production Costs, The Price Is About 30% Higher Than Inferior Aluminum Alloy Doors And Windows. Some Aluminum Alloy Doors And Windows Made Of Aluminum Profiles With A Wall Thickness Of Only 0.6-0.8 Mm, The Tensile Strength And Yield Strength Are Much Lower Than The Relevant National Standards, And It Is Very Unsafe To Use. Therefore, The Sealing Material Of Doors And Windows Is A Functional Accessory That Cannot Be Ignored During The Installation Of Doors And Windows, And Its Performance And Lifetime Also Need To Be Paid Attention To.

Especially The Current Broken Bridge Aluminum Alloy (melting Point 660 ℃) Doors And Windows, In Order To Have Good Sound Insulation Performance And Heat Insulation Performance, The Sealing Work Must Be Done First, Otherwise The Water Mist Will Enter The Hollow Layer Glass And Cause The Middle Of The Door And Window Glass. A Layer Of Water Mist Appears That Affects The Line Of Sight. Aluminum (Al) Alloy Door And Window Sealing Materials Are Divided Into Sealing Materials For Inlaid Glass Materials And Sealing Materials For Sealing Between Frames And Fans According To Their Uses; According To Materials, They Are Divided Into Sealing Strips, Sealing Tops And Sealants. Broken